You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. Check that it is not attached onto plastic parts. Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Plug the add-a-circuit into the fuse box in the correct orientation. Install the fuse you just removed into the installation kit add-a-fuse circuit. Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse.

If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.

If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. Open the fuse box, find the correct fuse slot for your hardwire kit. Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 22.8V(24V cars), thus preventing it draining the battery.

This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Three Way: 1440P+1080P+1080P Dual: 1440P+1080P Single Front: 1520Pĭual:1920x1080 30fps, Single Front 2880*2160P 24fps or 1920*1080P 60fpsĭirectly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.ĭirectly to the ignition wire for power only so it can turn on and off with the ignition.

Dash cam works when car is off